Pearl Product Series Optimized for
Low-Power Materials Processing
nLIGHT Corp. announces the introduction of Pearl fiber-coupled diode laser products specifically designed for industrial applications such as plastic welding and soldering that require bright power in a small, rugged package. nLIGHT’s Pearl
fiber-coupled diode laser series with nXLT single emitter diodes
has redefined industry benchmarks for reliability and efficiency.
Pearl comes standard with a two-year warranty and can be
configured for a four-year warranty. Configurations are available
at 915, 940 and 980 nm wavelengths with up to
100 W power from 200 to 800 m PowerCore fiber. An
optional pilot beam is also available.
nLIGHT Corp. | Vancouver, Wash., U.S.A. | + 1.360. 566.4460
roni.zeggert@nlight.net | www.nlight.net
New NIR Bandpass Filters SP for Distance Metering and
Safety Applications
Optics Balzers AG, the successor to Oerlikon Optics, has rolled out a new generation of
NIR bandpass filters designed for very high blocking of visible light. The NIR Bandpass
Filters SP are produced with advanced sputtering coating technology, resulting in high
stability of the filter’s spectral performance under stringent application conditions. Optical
sensing applications in the fields of automotive, industrial safety and instrumentation are
increasingly requiring higher quality and better performance of the optical thin film coated
components. In response to this market need, Optics Balzers has developed another key
product—a new-generation NIR Band-pass Filters SP. They are produced with
sputtering coating technology using online
process control to ensure consistently high
quality in volume production.
Optics Balzers AG
Balzers, Liechtenstein
+423.388.5160
media@opticsbalzers.com
www.opticsbalzers.com
ULF Isolation Workstation is ideal
for sensitive equipment up to 90 kg
A new ultra-low-frequency (ULF) vibration-isolation workstation for lighter loads has been
introduced to the U.K. and Ireland by Elliot
Scientific. The Kinetic Systems’ 2800 Series
LLHP is designed to meet the exacting requirements of sensitive equipment weighing in the
50 kg range (90 kg max). The tabletop—with
or without mounting holes—is normally a lightweight aluminium extruded core 76 cm square
and 5 cm thick, but it can also be constructed
from a variety of other composite cores on request. The proprietary trifilar pendulum mounts
and Active-Air suspension used in the table’s
construction provide exceptional horizontal axis
vibration isolation that outperforms mechanical systems, and a high level of isolation in the
vertical axis. Isolation efficiencies of 96 percent
vertical and 97 percent horizontal (at 10 Hz and
above) are typical.
N ew Product Guide from Gentec-EO
G entec Electro-Optics is pleased to announce the launch
o f its new 2009 Product Guide. This new guide can
a lso be found on its Web site ( www.gentec-eo.com) in
an easy-to-navigate, interactive PDF format. Within its
p ages, you will discover its new products, such as the
h igh power 3 kW and 10 kW HP series detectors, the
S -LINK- 2 dual-channel PC-based power and energy
m onitor and the UP19K-VR volume absorber power
d etectors, featuring very high energy density
thresholds. Gentec-EO’s product line includes pyroelectric
joulemeters and calorimeters for ultra-low to ultra-high
energy measurements, thermopile power meters and
photo detectors, and a complete set of products for
beam diagnostics. Whatever your needs, Gentec-EO
will always strive to match your requirements.
Elliot Scienti c Ltd. | Harpenden, U.K.
+ 44(0)1582.766300
simon.weight@elliotscienti c.com
www.elliotscienti c.com
Gentec Electro-Optics Inc. | Quebec , Canada | + 1.418.651.8003 x330
nlitalien@gentec-eo.com | www.gentec-eo.com
The Product Profiles section is based on information supplied by manufacturers. Optics & Photonics News assumes no responsibility for
its accuracy. Only a few products can be highlighted in each issue. High quality art is taken into account in the selection process, as are
newsworthiness and relevance to the optics and photonics industry. Send releases to productrelease@osa.org.
