New 4-Way and 2-Way Combiner/Dividers
Cover 2.0– 6.0 GHz
Innovative Power Products Inc. (IPP)
announces the availability of their new
4-way and 2-way high-power combiner/dividers, each covering
2.0– 6.0 GHz at 100 W. The
IPP-1013 combines or divides
four signals of up to 100 W CW
total RF power, in a 5.0” 2. 5”
0.80” package with SMA connectors. Insertion loss is less than 0.8 dB, phase
balance is less than ± 5 degrees and VSWR is less than
1.30: 1. The IPP-1016 combines or divides two signals of up to 100 W CW
total RF power, in a small 2.0” 1. 40” .73” package with SMA connectors.
Insertion loss is less than 0.35 dB, phase balance is less than ± 5 degrees and
VSWR is less than 1.30: 1.
Innovative Power Products | Holbrook, N. Y., U.S.A. | + 1.631.563.0088
email@example.com | www.innovativepp.com
Path Gas Cell
CIC Photonics Inc. has released a new
14.4-meter-long path gas cell. The Ranger-
EN14 provides the 14.4-m path length needed
to extend the limits of detection sensitivity of
the gas cell to the 10 ppb range. Although the
path length has been increased 50 percent
over that of the Ranger-EN 9.6-m cell, the
physical dimensions of the gas cell have not
been increased, enabling the installation of
the Ranger-EN14 on-line and in limited space
areas. It has the highest energy throughput
(> 25%) of all 14-m cells, and with stainless
steel mirrors and cell body, it can be used in a
variety of process and industrial applications.
The applications span from semiconductor
plant monitoring to moisture analysis, continuous emissions monitoring, and other corrosive
and toxic gas applications.
Powerful New Features for General Lighting and Display Design
Light Tools 6. 2, illumination design
and analysis software from Optical
Research Associates (ORA), delivers
powerful new features that facilitate the
design of a wide variety of applications, ranging from LEDs to displays
and luminaires. The introduction of a
backward ray tracing capability can
dramatically reduce the time needed to
design and analyze systems such as
sources, luminaires and projectors. This
important capability provides a practical
solution for analyzing illuminance, intensity and color at a particular location, or
in a particular direction, rather than taking unnecessary time to analyze the entire pattern.
This approach saves time by tracing far fewer rays than a forward ray trace would require
to reach the same level of accuracy.
CIC Photonics | Albuquerque, N.M., U.S.A.
Optical Research Associates | Pasadena, Calif., U.S.A. | + 1.626.795.9101
firstname.lastname@example.org | www.opticalres.com
27XL Explosion-Proof LED Light with XLT Now Available
in Clear Lens Option
Model 27XL explosion-proof LED light with XLT Light is now available with
a clear lens option, expanding options to five LED/lens colors (amber, blue,
clear, green and red). 27XL produces 60 high intensity flashes per minute.
This warning light operates on 24VAC/DC, 120VAC, and 240VAC 50/60 Hz.
Extreme Light Technology (XLT) is a breakthrough, high-intensity LED array
designed to meet the demands of industrial customers, producing maximum
light output and superior lens fill. Field configurable to either steady burning
state or flashing mode, 27XL provides improved performance over standard
LEDs and increased versatility while maintaining low power consumption and
shock/vibration resistances expected from LED signals.
Federal Signal Corp. | University Park, Ill., U.S.A. | + 1.708. 534.3400 x7644
email@example.com | www.federalsignal.com